Applied to the brush sweeper brushes are divided into cylindrical, conical and flat or conveyor. Cylindrical brushes can be with a solid pile arrangement, paniculate, or sheaf. They are used for sweeping the pavement and supply estimates for the transporting device, or directly into the hopper.
The fan and water pump is driven from the box changes [...]
The energy balance of these machines in operation include (depending on the technology works): the cost of power to drive the bitumen pump, defined as vehicles for transporting and distributing bitumen, cost of power to drive the compressor is defined as machines that destroy the hard cover, the cost of power to drive the mixer to be taken when mixing the mastic in the boiler with a capacity of [...]
Operation of Watering-washing machines with a defective fastening the tank valve or damper central nozzle is prohibited. For operation and maintenance of watering-washing machines are prohibited: 1) check the oil level, fill the oil, pull the seal during operation of a centrifugal pump, and 2) to move the machine with the sleeves neulozhennymi diversions, 3) fill the tank with water from the water with the engine running the machine. It is strictly forbidden to perform at [...]
Motor mower SC-15 is designed for cutting grass on lawns, mounted on three-wheel cart having front drive axle with two wheels, rear - one piano, allowing its rotation. The basic working equipment ploskovraschatelnogo cutting device type. Drive two-bladed knife carried by single-cylinder, two-stroke, gasoline engine power 2.9 kW (4 hp.). At the mower is also provided [...]
Behind the machine is installed obmyvochnaya Camera (for washing high pressure hoses when removing it from the well), it serves water water pump pressure of 0.5-1 MPa, which can be adjusted with a valve. Obmyvochnaya chamber consists of an outer and inner cylinders, two rings that connect these cylinders, bracket and fitting.
Workflow control from the control panel, located behind the [...]
Winter equipment machines KO-708 consists of a plow, brush and cylindrical hopper-spreader. Plow blade with a rubber knife, mounted on the front of the lift frame chassis with software manually turning it left or right while moving. Up and down the plow to the vehicle and the working position by means of hydraulic cylinders. Winter equipment consists of a brush [...]
