The ceramic emitter is a panel consisting of individual tiles size 65X45 mm, 12 mm thick. Each plate has a cylindrical 500-1400 channels (depending on its type) with a diameter of 0.8 to 1.7 mm.
Burners are collected in a block that to make it windproof top (in the area of air leaks) equipped removable protective cover, and [...]
Applied to the brush sweeper brushes are divided into cylindrical, conical and flat or conveyor. Cylindrical brushes can be with a solid pile arrangement, paniculate, or sheaf. They are used for sweeping the pavement and supply estimates for the transporting device, or directly into the hopper.
The fan and water pump is driven from the box changes [...]
Hydraulic drive machine provides a lifting and lowering of the working body and the rotation of the rotor housing. Unlike hydraulic plow DE-210 is the design concept of separate hydraulic - hydraulic cylinders, control valve and hydraulic tank.
The base chassis is also modified for snowplow installation of special equipment - reinforced front springs, pneumatic finalized, chassis frame and some other elements. [...]
Motor mower SC-15 is designed for cutting grass on lawns, mounted on three-wheel cart having front drive axle with two wheels, rear - one piano, allowing its rotation. The basic working equipment ploskovraschatelnogo cutting device type. Drive two-bladed knife carried by single-cylinder, two-stroke, gasoline engine power 2.9 kW (4 hp.). At the mower is also provided [...]
Behind the machine is installed obmyvochnaya Camera (for washing high pressure hoses when removing it from the well), it serves water water pump pressure of 0.5-1 MPa, which can be adjusted with a valve. Obmyvochnaya chamber consists of an outer and inner cylinders, two rings that connect these cylinders, bracket and fitting.
Workflow control from the control panel, located behind the [...]
Winter equipment machines KO-708 consists of a plow, brush and cylindrical hopper-spreader. Plow blade with a rubber knife, mounted on the front of the lift frame chassis with software manually turning it left or right while moving. Up and down the plow to the vehicle and the working position by means of hydraulic cylinders. Winter equipment consists of a brush [...]
