cars for maintenance and repair of urban roads

Special equipment the truck M-30

December 4, 2008 | Filed under: Defining the moment of inertia

Загрузка ... Loading ...
Special equipment the truck M-30

Special the truck M-30 consists of a platform, crane, hydraulic and control system, a set of containers for the capture of their loading (unloading) entrenching tool.

With the help of a crane with hydraulic drive and a special grip on the truck platform set 8 containers (four on each side) which are mounted on frames tilting platforms. Filled waste containers garbage transported to the site recycling or disposal. Unload containers under the influence of its own weight and the waste valve by turning left and right tilting and tilting platforms attached to them with open containers with lids. The truck platform - welded, consists of a base, two tilting platforms, locks used for their fixation and mounting frames hinged containers on platforms. The base platform is brewed from the longitudinal and transverse beams in the form of spatial trusses, laid on the frame of the car and fixed ladders to the frame longitudinal members. At the ends of cross beams welded to the base platform brackets, attached to which pivotally tilting platform. Their construction - welded, and it provides slots for installation of containers, which are recorded in the transport position on the basis of the platform locks.

The equipment of each garbage truck M-30 consists of 32 containers with a capacity of 0.75 m3 for domestic waste, and 0.55 m3 - for food waste.

The container consists of a welded tank and cover, on which the door to load the debris. Go to the bottom of the tank are welded rails with holes for mounting the container on the machine, and on the sides of the hopper welded corners for his capture during loading. Tongs, which provides recovery and removal of container, consists of two hinge-connected arms, strapped spring. The truck crane with hydraulic drive consists of a column, arrows, trunk, suspension hook rotation mechanism, hydraulic cylinders and boom rotate the trunk. Pillar tap bolts fastened on the basis of the platform and consists of a rotation mechanism and the lift cylinder radius. Crane boom is welded from steel plates pivotally attached to her trunk with a welded hook suspension. Slewing column crane rack type (bar, reciprocating, and gear, located in the engagement with her, planted on the pins on the shaft of the column.) Boom - plunger, single acting. Boom descends under its own weight.



We recommend to look

  • Machines for cleaning trays winter
    Machines for cleaning trays winter. Trays, prilotkovye areas of streets and roads clear of snow in the winter, and from groundwater deposits in the spring and summer special machines, work equipment which is installed on cars and trucks-. Used car in Moscow Dhul-ZOA, designed for cleaning stalls and prilotkovyh sections of city streets and roads in the winter of [...]
  • Management of special equipment
    All management of special equipment is located in the cab. The torque from the motor base unit is transmitted via PTO, protective sleeve, hand-outs and conical gears to the conveyor drive shaft and the shaft screw feeder, as well as to drive the main brush. The second (upper) shaft PTO is used to drive the oil pump gear. Hydraulic drive machine is [...]
  • Remixer
    Remixer - this is, in essence, the machine "Repaver" additionally equipped with a dosing and mixing units. Warmed up the old asphalt coating loosen knives, and then screw the distributor and may be behind the blade is fed into the mixing unit equipped with two shafts. Fresh mixture from the hopper conveyor enters the metering device which forwards it to the mixer, where the old and new weight [...]
  • Drive compressor
    Drive compressor unit is made ​​from the PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In its position hopper hydraulic cylinder up the thermos, allowing automatic translation of the bucket truck-mounted on the rear of the body, and manual vibratory rollers of the transport situation in the workplace. Bucket truck [...]
  • Crane M-30
    Crane - Rotary, capacity 0.5 tons installed on the right side while moving machinery at the site back cover. Up and down arrow hydraulic cylinder, installed inside the rotator. Turn "by crane from the shaft of the hydraulic motor through a worm gear by a mechanism located inside the frame and the rear cover. Pushing plate - a curved steel plate reinforced by ribs. [...]

Leave a comment