
In a system with transfer points using any enclosed space, adequate in size to accommodate a small seal performance, and shift the truck spetskonteynernogo special containers, as well as to maneuvering vehicles, delivering waste. transported household waste to the transfer point in the bins or containers, non-replaceable, such as on spetstelezhkah.
Due to the fact that a transshipment point seal, it is advisable to use it and for systems with interchangeable containers.
In the application of the system with replaceable containers waste transfer point to deliver container garbage truck. The system operates as follows. Waste delivered to the gasket, docked with the special containers, and reloaded it from them in containers or garbage, and then use the move in special sealant and seal. After filling in the empty Refuse replace that with a dock seal.
Filled Refuse immersed in the garbage and transported to places of disposal and recycling. The time required for waste disposal, washing machine to check the item and cleaning special containers used to fill the next special containers, and coupled with a sealant.
Depending on the distance of transportation of waste to the sites of their treatment as well as the amount of waste delivered to the gasket, the system serves one or more musorovoznyh machines.
Thanks to the compaction of waste in special containers appropriate to apply this system in places where produced waste, the density does not exceed 0.2-0.25 t/m3.
Tags: water , the driver , trash , waste , transport We recommend to look
- Directional R75-22 and R75-23
In the rear valves are R75-22 and R75-23 to control the hydraulic cylinders lift the rear cover plate and the hopper, drive the truck crane plate buoyancy is controlled by three electro-hydraulic spool ZSU-5, which includes remotely from the portable console. During operation, the truck M-71 standard container with a capacity of 75 m3 0 with welded extra bushami zachalivaetsya [...] - Operating conditions
The most significant of these affecting the efficiency of the use of special vehicles - is the intensity of vehicular traffic on the carriageway urban roads, the location of places where cars are filling the technological materials (water, sand and salt mixture, reactants), the location of places of disposal of domestic waste, etc. As indicated, the amount of pollution and especially their placement on the main road [...] - The requirements for cleaning the site
Areas to be cleaned is selected with the following requirements: 1) the width of the strips should be harvested throughout the area to provide the same or a combination of rational use of machinery after harvesting the widest thoroughfares, and 2) the intensity of vehicular traffic within the site, as well as its level of accomplishment should be equal, and 3) the snow should be removed one way, [...] - Technology of removal of household waste
The resulting urban waste can be solid (household waste) and liquid (domestic and fecal waste). Number of municipal solid waste (MSW), their composition and bulk density depend on numerous factors, the most significant of which should be considered during the year, the climate zone in which the city is, the degree of improvement of housing stock. A characteristic feature of solid waste - a change in their relative amounts [...] - Techno-economic evaluation and optimization of operations
Collect and transport solid waste in the ever-increasing scale, and therefore becomes very important techno-economic evaluation and optimization of these works. Due to the sharp differences in the operational background, one even the most sophisticated system for collecting and transporting waste is impossible to ensure high technical and economic parameters for different operating conditions. So it took a complex of various technological systems, each of which [...]