The working body plow DE-210 is attached to the front of the machine frame longitudinal chassis and in the position of the skis is based on clean snow from the surface of the pavement. In the transport state of the working body holding device is fixed to the upper position.
To install a working snowplow equipment on the chassis of ZIL-131 needs some refinement of its design - it is necessary to remove the front buffer and tow hooks, welded reinforcement bars and brackets, extended frame chassis, strengthened front springs.
Auger snowblower-DE-2 0 4 (D-4 7 0) is used to clear snow from city streets and squares, roads, access roads, runways and taxiways of airfields, can be used to drop snow rollers formed plows and other snow loading into vehicles. Snow blower is mounted on the chassis of ZIL-157KE and executed by a single-circuit. Car engine dismantled. The drive wheels and the body is working on a diesel engine U2D6-W, installed behind the cab on a special frame. Special equipment consists of a plow engine working body and driveline suspension, creeper hydraulic and control systems. For loading of snow in the vehicle provided the installation of a special chute. The principle of operation of the snowplow snowplow similar to DE-210. The working body is unified, and the drive system of the working body and the chassis is also similar to plow DE-210.
We recommend to look
- Snegopogruzchik D-566
Snegopogruzchik D-566 is designed for the loading of the shafts and the snow piles in the vehicles. It is mounted on a special chassis with the use of automobile and tractor units and has a chassis, body work and drive, hydraulic, pneumatic and control mechanisms with a shovel. Special off-road chassis with two drive axles, and hydrostatic creeper, providing infinitely variable [...] - Sweeping equipment
Sweeping up the equipment frame, tapered gear, cylindrical brush, chain drive with damper device chain hoist brushes. The brush is installed between the front and rear wheels at an angle of 62 ° to the longitudinal axis of the machine. The torque on the shaft of the brush is passed from the bottom of the shaft of the transfer case through the propeller shaft, conical reducer and chain drive. Frame brushes, consisting of [...] - Single Scheme
In a single-circuit to drive the plow working body uses the same engine as an engine for driving, and when - twin engine - for driving the working member is installed an additional drive. The performance blowers are divided into light (up to 200 t / h), medium (up to 1000 t / h) and heavy (more than 1000 t / h). When snegoochistke city streets and [...] - The device of special vehicles for road maintenance and disposal of household waste
The special cars for the summer maintenance of urban roads include watering, washing, sweepers, as well as machines for mechanized cleaning of wells and storm sewer mains. Watering-washing machines. They are used for cleaning and watering of roads with asphalt and cement-concrete surfaces and gutter sections, as well as to sweep dust, dirt and debris, they can be used [...] - Sidewalk machine T-469
Sidewalk machine T-469 on the chassis of the UAZ-469B - a plow, snow blower brush, equipped with a winter working equipment, which consists of a blade with a rubber blade and cylindrical brushes with nylon bristles. Welded blade mounted in front of the car and the front wheels can rotate around a central pivot to the right and left at 60 ° relative to the longitudinal axis of the machine. The brush is placed between [...]
Loading ... 
