The working body of the machine is located behind the rear wheels on the left side and can be nominated during the work for its height, for easy observation of markings. The working body is equipped with a device to regulate the thickness of the lines and affixed removable end flaps (for drawing a line width of 100 and 200 mm). During the working body markings are not in contact with the surface.
All executive agencies marking machines are hydraulic. torque on the drive shaft axial piston pump is transmitted from the PTO base chassis. To move the machine with a given operating speed in the transmission of a vehicle mounted splitter, unified with dual labeling machines DE-18.
The broken lines of varying lengths in accordance with GOST 13508-74 is applied with an electric power program, which gives commands to the electrohydraulic valve that controls the hydraulic cylinder valve end of the working body. When moving the machine the driver sends her on a road marking line with boom telescopic sighting device, which consists in the transport position and is attached to the bumper of the base chassis.
We recommend to look
- Remixer
Remixer - is, in fact, the car "Repaver", equipped with additional dosing and mixing units. Warmed up the old asphalt coating loosen knives, and then screw valve and located behind the blade is fed into the mixing unit equipped with two shafts. Fresh mix from the hopper conveyor enters the dosing unit, which sends it to the mixer, where the old and the new mass [...] - Cars for winter harvest bins
Cars for winter harvest bins. Trays, prilotkovye areas of streets and roads clear of snow in the winter and from groundwater sediment in the spring and summer special machines, work equipment which is installed on cars and trucks, dump trucks. The used car in Moscow, Zul-ZOA, designed for cleaning stalls and prilotkovyh sites of city streets and roads in the winter of [...] - Asfaltoraskladchik ED-1M
To lay the asphalt mix in small areas, as well as paving of streets and narrow passageways yard convenient asfaltoraskladchik ED-1M developed by Bureau Chief Control and Improvement of Road Management in Moscow. The basic chassis is the paver with a 4045M forklift forklift forklift dismantled, which is set to replace suspended frame (inside a framework for guiding movable frame is moved). On a mobile [...] - Asfaltorazogrevatel DOE-2
Asfaltorazogrevatel DOE-2 on the chassis of the vehicle UAZ-451DM consists of a creeper with arms control, body, LPG installations, communication, power burners with infrared gas burners such as TIG-1, the lifting mechanism block burners, hydraulic and electrical equipment. In order to improve the quality of work, reducing the time of heating and gas flow rate on asfaltorazogrevatelyah establish a system of automatic regulation (SAR) of the process of heating surface. [...] - Management of special equipment
All management of special equipment is located in the driver's cab. The torque from the motor base unit is transmitted through the PTO, protective sleeve, hand-outs and conical gears on the drive shaft and the shaft conveyor screw feeder, as well as to drive the main brush. The second (upper) power takeoff shaft is used to drive the oil pump gear. Hydraulic drive car is [...]
Loading ... 
