In a system with non-replaceable container of solid waste collected in containers with a capacity of 0.75-0.8 m 3, installed in a specific location - usually on a platform in the yard. They are charged directly to residents homes. In apartment buildings containers set under refuse chutes and then from the camera musoropriemnoy waste overload in the garbage. For a small admission waste bins for refuse chutes installed capacity of 100 [...]
July 11, 2009 | Filed under: Technical and economical evaluation and optimization of work | No Comments
Process operations and frequency of summer cleaning the streets, made on the basis of the results of investigations of the dynamics of accumulation of contaminants on road surfaces with a light intensity of vehicular traffic. Compliance with process operations, should ensure reduction of pollutants on the surface of 1 m2 of road pavement to the following values (in grams):
On the main highways and streets located in comfortable [...]
July 11, 2009 | Filed under: Main provisions of mechanized operations technology content technology works | No comments
Advantages of snow blowers combined with the working body (compared with a split) - their compact size and lower weight, but they are unproductive and inferior to the distance throwing snow.
By type of a working body, these blowers are divided into plow-rotor, Plow and rotary milling. Operating equipment blowers plow consists of a plow, which sends him sliding on the surface of the front [...]
July 10, 2009 | Filed under: Car CO-502 for sewage networks | No comments
Before leaving the truck bodywork on the line to check: 1) the oil level in the tank, and 2) the work of PTO, the mechanism of movement control and pushing the plate cylinder, tilting mechanism, and 3) the reliability of fixed stops turning, and 4) serviceability elektrosignalizatsii 5) sealing valves pushing board and tilting mechanism and the joints of the hydraulic system. When operating the machine must be systematically checked the serviceability of [...]
July 9, 2009 | Categories: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
Machines of this type the most difficult of all, used in cleaning the city roads, and their effectiveness largely depends on the working parts, operation and adjustment.
A key element of the machine, which provides separation of dirt and their supply in a car - brush device. With the help of gutter brushes clean the most contaminated part of the road [...]
July 8th, 2009 | Filed under: Control of the spray gun | No Comments
Plow equipment - a blade with a rotating frame, the towing frame, radius arms, pushing the frame and hoist the blade. Moldboard is located in front of the machine and is a welded construction of steel profile
the sheet. To the bottom of the dump is bolted sectional rubber knife, which when hit by an obstacle turns back and passes the hurdle for them. [...]
July 8, 2009 | Filed under: Car CO-502 for sewage networks | No comments