Road-building equipment

After emptying the car wash should be at the point where the container is washed.

In addition to the complete mechanization of loading and unloading of containers, the system provides the lowest possible cycle time of arrival of containers and vehicles for loading and unloading.

However, the advantages of this system can be implemented only when properly filled containers, and if the mass of waste will exceed 0.25 t/m3.

The system of collection and removal of bulky household waste in containers in the exchangeable entity similar to the preceding and differs from it only by the construction of container and methods of work organization. Thus, in contrast to a closed container having hoppers with lids, in this case, the public - resembling the platform of the truck.

Collection and transportation of bulky waste organized in two ways. In one case, at the request of housing authorities set the containers in a certain place for 1-2 days, during which the population and housing providers should fill out their bulky waste. In another case, waste can be collected on a special schedule, developed by the company for cleaning urban areas, in coordination with the housing authorities. Pre-set time the container housing authorities reported to the population, which should prepare waste and fill the container at the time of finding it in this neighborhood.

Filled container is immersed in empty garbage truck and then transported him to the place of storage of waste. The machine should be a container for the washing station. Clean, empty containers are transported to a new place and there establish a garbage truck is sent to another container filled with a bulky waste.

We recommend to look

• Requirements for cleaning the site
  Areas to be clean, choose from the following requirements: 1) the width of the strip to be harvested over the entire section of the same or a combination to ensure the rational use of machinery after harvesting the most extensive passages, 2) the intensity of vehicular traffic within the site, as well as its level of accomplishment must be equitable, and 3) the snow should be removed in a uniform way, [...]
• Directional R75-22 and R75-23
  At the rear there are valves R75-22 and R75-23 to control the hydraulic cylinders lift the rear cover plate and the loading shovel, drive the truck crane ejection plate is controlled by three electro-hydraulic spool ZSU-5, which includes a remote portable control panel. During operation, the truck M-71 standard container with a capacity of 75 m3 0 with additional welded bushami zachalivaetsya [...]
• Operating conditions
  The most significant of these affecting the efficiency of special-purpose vehicles - is the rate of movement of vehicles on the carriageway urban roads, the location of places where there is a filling machine technology materials (water, peskosolyanoy mixture reagents), the location of disposal sites and waste, etc. As indicated, the amount of pollution and especially their placement on the roads mostly [...]
• Technology removal of household waste
  The resulting urban waste can be solid (household waste) and liquid (economic and fecal waste). The amount of solid waste (MSW), their composition and bulk density depend on numerous factors, the most significant of which should be considered during the year, the climate zone in which the city is located, the degree of improvement of housing stock. A characteristic feature of solid waste - a change in their share of [...]
• Technical and economical evaluation and optimization work
  Collect and transport solid waste in ever-increasing scale, and therefore becomes very important techno-economic evaluation and optimization of these works. Due to the sharp differences in the operational background, one even the most sophisticated system for collecting and transporting the waste is impossible to ensure high technical and economic parameters for different operating conditions. So it took a set of different technological systems, each of which [...]