Cesspools cleaned as follows. The car pulls to the place of work and into the sump suction hose is immersed. Handle four-way cocks transferred to the "absorption", include a vacuum pump and a safety signaling device. After 2-3 minutes open the gate reception hatch and under the vacuum tank begins to fill with sewage. After filling the tank, turn off the PTO, shut the rotary gate valve, remove the vacuum, remove the suction hose and wash it with water from the wash tank.
After the delivery of goods at the place of its neutralization tank unload it by creating a pressure pump, and gravity.
Tank car - cylindrical shape with spherical ends, mounted on poles and ladders attached to the frame longitudinal vehicle. In order to better drain the tank has a slope (back) at 2-4 °. At a special frame mounted vacuum pump that creates a vacuum in the tank or pressure. The rotation is transmitted to it from the box changes gears the car through the PTO, driveshaft, and V-belt transmission. Includes manual pump handle, installed in the cab. Safety signaling device - electric with a level sensor mounted on the lid of the tank cap with two safety valves.
Estimated power to drive the working equipment is accepted for its value in the most loaded cycle of operation.
Tags: device , a cylinder We recommend to look
- Obturator
Sealing device for loading the body waste and the coupling with the semi-trailer is out of the bunker, coupling, seals, hydraulic cylinders (power and idling). Bunker - a welded steel plate to which are welded stiffeners. Its design provides for the collection two rails connected by cross-bar, on the right and left side fixed coupling device mounted inside the [...] - Sidewalks-sweeper TUM-975
Sidewalks-sweeper TUM-975 has special equipment mounted on a special self-propelled chassis, performed on three-wheel circuit with front drive and rear steering axles, which consists of a dual wheel. Daylight saving equipment consists of two main chute and a cylindrical brushes, hopper, and estimates of the type of pneumatic dust control. At the bottom of the hopper set screw, which provides unloading of [...] - The composition of the device podmetatelnogo
Sweeping device consists of a main cylindrical brush located behind the rear wheels of the machine, and two socket (tapered) brush trough located between the front and rear wheels on both sides of the machine, which allows two-way streets clean, and one-way transportation (moving cleaning machine direction of traffic). Flume brush grabs debris from areas prilotkovoy have [...] - Location of engine and gearbox
Motor vehicles, along with distributing gear mounted on the chassis of the unit on the rear axle. Distribution of the drive gear by conveyors, screw distributor, Tamper, vibration plate, the mechanism of movement, cooling fluid and the management bodies of the workers. The movement of the machine is ensured hydrostatic transmission, lifting and lowering of the working bodies - hydraulic cylinders. Overburden stripping unit consists of a loosen [...] - The working body snegopogruzchika D-566
The working body consists of snegopogruzchika Tine Feeder, scraper conveyor, and his arrows. Tine Feeder is a frame from the right and left legs, the main gearbox and drive shaft assembly line. The frame feeder (Spade) - welded, lined sheets. In front of the feeder mounted knife, consisting of four interchangeable sections, bolted to the corner of the washer. The main gear Feeder [...]
Loading ... 
