Hardware PS-402M with a mixer for the transportation of bituminous slurry

Hardware PS-402M with a mixer for the transportation of bituminous slurries of mounted with tractors of class 0.9 - 1.4 m, is designed for the transportation of bituminous slurry and moving the distributor of the treated road surface. It consists of a tank, the rear platform, ladder,
rubble from the middle to the edges of the bunker. Planting a drum - a sleek rotating shaft is mounted on spherical bearings at the bottom of the hopper under the slit seeding. Drive the screw and the metering drum include using the clutch mechanism and a chain of transmission, which transmits the rotation of the auger to the drum. Rotating drum delivers crushed to slit seeding hopper. The screw at the same time distributes the rubble and the width of the hopper and prevents the hang of rubble on the drum.
hydraulic gear, bolt, bracket, drain pipes. The allocation of bitumen slurries clings to the tank behind the distributor of RD-902. Tank - welded, cylindrical cross-section. Inside it is mounted shaft-stimulus driven in rotation by hydraulically from the tractor hydraulic (in gear). At the top of the boot is the neck with safety bars, cover with lid. At the bottom rear of the bottom is the outlet to which is fastened the bolt is designed for controlled discharge of the mixture. To the rear bottom of the tank is mounted a platform for service arrangements. Wal-stimulus consists of a shaft, screw and rack, bolted, hydraulic him from the hydraulic-PPA-64 and lines connecting it with the tractor's hydraulic system. At the outlet of the rear of the tank set the shutter, closing or opening to regulate the flow of the mixture.
Go to the trailer frame longitudinal brackets are attached to connect the traction circuit distributor of RD-902 bituminous slurries. Drain pipe is a rectangular box, which gradually narrows and passes into the cylinder. distributor of RD-902 can be laid bituminous slurries to the width of 2.5, 3.5 and 3.75 m and a thickness of 15 mm. Distributor - a rectangular shape, with no bottom in the longitudinal septum is divided into parts - boot and distributing (consisting of two identical hinged sections). Bottom attached to the distributor on both sides of the runners to control the vertical position of the distributor housing with screw jacks.









