Motor mower SC-15 is designed for cutting grass on lawns, mounted on three-wheel cart having front drive axle with two wheels, rear - one piano, allowing its rotation. The basic operating equipment ploskovraschatelnogo cutting device type. Drive two-bladed knife carried by single-cylinder, two-stroke, gasoline engine power 2.9 kW (4 hp.). At the mower is also provided on the drive leading from the front axle drive a knife through the V-belt drive, worm gear and chain drive. Performance Mower - up to 1700 m2 / h, the height of the cut - 30-78 mm, weight - 45 kg.
The design of manual mowers at the air-cushion type SC-20 is designed for mowing grass parterre and ordinary lawn and turf on the slopes. Its main components: the engine of the Petrol Saw "Friendship-4", body-chamber, fan, ploskovraschatelnogo cutting device type. Fan - centrifugal pumps air into the body-chamber through a hole in its upper part and creates a positive pressure in the inner cavity of the chamber, which lifts the mower over the lawn. Move the mower operator manually using the control stick.
At the bottom of the housing authority are working two skis, serving to limit the height of the grass cutting layer. Hydraulic power mower consists of a working body of the actuator and the hydraulic cylinders control the frame of the working body. Performance of the mower at a rate of 5.63 km/ch-5800 m / h at a speed of 6.75 km / h - 7000 m2 / h
Trimmed bushes and the trees or using a motorized hand tools, or using special equipment (mounted to a wheeled tractor).
We recommend to look
- Sidewalks-sweeper K0-708
Sidewalks-sweeper K0-708 on the basis of self-propelled chassis T-16M has two versions: for the summer (equipped with a sweeping, cleaning equipment) and winter (equipped with a plow, brush and peskorazbrasyvayuschim equipment). In the summer of machine is used for cleaning dirt from the pavement in the winter - to clean the pavement of the fresh snow, sprinkling them with sand or chemical materials. The base chassis has a front and [...] - The drive compressor
The drive is made from the compressor PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In the working position hopper hydraulic cylinder rises thermos, allowing automatic translation of the bucket truck-mounted on the rear bodywork and manual vibratory rollers of the transport to working position. Bucket-truck [...] - Single Scheme
In a single-circuit to drive the plow working body uses the same engine as an engine for driving, and when - twin engine - for driving the working member is installed an additional drive. The performance blowers are divided into light (up to 200 t / h), medium (up to 1000 t / h) and heavy (more than 1000 t / h). When snegoochistke city streets and [...] - Removing the plow equipment for watering, washing machine
For watering, washing cars - removal of plow equipment (lowered plow) rasshplintovka and removal of suspension attachment plow fingers, toes turning away the nut ball mount coupler plow frame and disconnect from the towing frame, lifting ladders and finger mounting frame lift cylinder. Then - the removal of brush equipment, in which: giving way bolts right cheek brush frame, left [...] - Directional R75-22 and R75-23
In the rear valves are R75-22 and R75-23 to control the hydraulic cylinders lift the rear cover plate and the hopper, drive the truck crane plate buoyancy is controlled by three electro-hydraulic spool ZSU-5, which includes remotely from the portable console. During operation, the truck M-71 standard container with a capacity of 75 m3 0 with welded extra bushami zachalivaetsya [...]
Loading ... 
