Chipper Machine CM-25 CSS is used for trimming shrubs with large volumes of work. From the manual it has a more powerful motor (such as AP-32) and the large size of the cutting machine. It can cut the bushes in the horizontal and vertical planes at an altitude of up to 1.7 m, mounted on a special apparatus consisting of two brackets, two cylinders, a disk with holes and the plate, which is located on the right (in the direction of motion) of the tractor.
Chipper CSS-25-K CM is designed for manual and mechanized machine-cutting of bushes and shrubs hedges on the boulevards, squares. The composition of the working equipment includes a hand-Chipper USB-25K and machine - USB-25km. The power supply of electric brush cutter - power plant, mounted on the front of the tractor frame. The drive of the generator from the rear of the tractor PTO shaft through the PTO, drive shaft and a conical reducer, which provides the drive of the generator from the transmission of the tractor. Gearbox mounted on the generator cover bolts.
Sidewalk machine. They are designed for mechanical harvesting of the winter and summer, sidewalks, driveways, yards, and industrial areas with asphalt and cement concrete pavement.
Depending on the type of work equipment in the summer, these machines are cleaned and swept pavements in winter - raked and swept freshly fallen snow, sprinkled pavements with mineral and chemical materials, throw, snow blowers away. The basic chassis are cars, tractor and a special chassis.
We recommend to look
- The device of special vehicles for road maintenance and disposal of household waste
The special cars for the summer maintenance of urban roads include watering, washing, sweepers, as well as machines for mechanized cleaning of wells and storm sewer mains. Watering-washing machines. They are used for cleaning and watering of roads with asphalt and cement-concrete surfaces and gutter sections, as well as to sweep dust, dirt and debris, they can be used [...] - Remixer
Remixer - is, in fact, the car "Repaver", equipped with additional dosing and mixing units. Warmed up the old asphalt coating loosen knives, and then screw valve and located behind the blade is fed into the mixing unit equipped with two shafts. Fresh mix from the hopper conveyor enters the dosing unit, which sends it to the mixer, where the old and the new mass [...] - Location of engine and gearbox
Motor vehicles, along with distributing gear mounted on the chassis of the unit on the rear axle. Distribution of the drive gear by conveyors, screw distributor, Tamper, vibration plate, the mechanism of movement, cooling fluid and the management bodies of the workers. The movement of the machine is ensured hydrostatic transmission, lifting and lowering of the working bodies - hydraulic cylinders. Overburden stripping unit consists of a loosen [...] - The main features of the machine from the DE-5 model DE-5A
The main features of the machine from the DE-5 model DE-5A - the presence of her benzoelektricheskogo unit and working with electrical equipment (compressor, elektrovibrokatka, elektromolotkov). The hydraulic drive hopper, a thermos and a rear side of the machine is provided with hydraulic cylinders, hydraulic pump mounted on the gearbox mounted on the gearbox car chassis, equipped with a mechanism of inclusion; drive the compressor and elektrovibrokatka elektromolotkov carried out from [...] - Cars for winter road maintenance
For winter maintenance of urban roads, squares and streets are special cars: plow, brush and snowblowers, snegopogruzchiki, cars for winter harvest bins, removal of compacted snow, the distribution of mineral and chemical materials on the roadway, sidewalk cleaning and versatile cleaning machines. Snow plows plow-brush. They are designed to scoop and sweep snow. Plow-brush equipment mounted on vehicles [...]
Loading ... 
