Body garbage truck - welded from sheet steel, reinforced with rectangular and trapezoidal profiles, cross sections, welded to the longitudinal and transverse planes. Behind the body, hinged, rear cover naveshena (welded space frame), which pivotally mounted loading plate and the bottom (on axis) - hopper. In a cover mounted hydraulic cylinders drive plate and ladle. To cover the body is welded steerable turntable crane with a telescopic boom that can be rotated on rollers at 360 °. In the transport position of the back cover firmly against the body of screw terminals, and the tightness of the joint is provided with a rubber seal. Unloading plate is installed inside the body on rollers, arranged in the guide channels. The motion of plates is provided by a telescopic screw mechanism driven by a hydraulic engine.
Drive the truck all the actuators M-50's hydraulic. It consists of a gear pump, two control valves, gidrozolotnikov electric, hydraulic tank, hydraulic cylinders drive the boom and slewing crane, loading plate, lift the back cover, raising and lowering the hopper, hydraulic drive unloading crane and winch plate, filtration systems and protection against overload and hydraulic lines.
We recommend to look
- Management of special equipment
All management of special equipment is located in the driver's cab. The torque from the motor base unit is transmitted through the PTO, protective sleeve, hand-outs and conical gears on the drive shaft and the shaft conveyor screw feeder, as well as to drive the main brush. The second (upper) power takeoff shaft is used to drive the oil pump gear. Hydraulic drive car is [...] - Directional R75-22 and R75-23
In the rear valves are R75-22 and R75-23 to control the hydraulic cylinders lift the rear cover plate and the hopper, drive the truck crane plate buoyancy is controlled by three electro-hydraulic spool ZSU-5, which includes remotely from the portable console. During operation, the truck M-71 standard container with a capacity of 75 m3 0 with welded extra bushami zachalivaetsya [...] - Obturator
Sealing device for loading the body waste and the coupling with the semi-trailer is out of the bunker, coupling, seals, hydraulic cylinders (power and idling). Bunker - a welded steel plate to which are welded stiffeners. Its design provides for the collection two rails connected by cross-bar, on the right and left side fixed coupling device mounted inside the [...] - The composition of the device podmetatelnogo
Sweeping device consists of a main cylindrical brush located behind the rear wheels of the machine, and two socket (tapered) brush trough located between the front and rear wheels on both sides of the machine, which allows two-way streets clean, and one-way transportation (moving cleaning machine direction of traffic). Flume brush grabs debris from areas prilotkovoy have [...] - Power transmission spreader
Power transmission drives the spreader conveyor drive and tipping the spreading equipment. Its main elements - the PTO, drive shaft, gear drives the conveyor, conveyor chain, hydraulic drive. The torque from the transmission base car passed the lower power takeoff shaft to the pump drive the spreading disk, and the top (through the drive shaft) - on the pump drive belt. [...]
Loading ... 
