Road-building equipment

Mower ED-101 is mounted on a tractor MTZ-50. Its main elements - the rotary cutting device type, the frame of the working body, hydraulic drive, sub-frame.

Hydrodrill has a structure in the form of a hollow rod, terminating at one end of a cone-shaped tip, which is applied to the surface of the fertilized zone of a tree or shrub. The other end of the rod by a flexible rubber hose is connected through a valve with a watering-washing machine. When you turn on the pump the water out of the car under the pressure of 0.5-0.7 MPa is applied on the hose and rod into the soil and washes it in a well defined depth. Then the pressure was lowered to 0.1-0.2 MPa, and the soil is fed a nutrient solution of mineral salts or pure water.

Installations for watering green areas can be stationary or mobile. Mobile is a watering-washing machines PM-130B. Stationary placed on the same lawn and constitute a system of pipelines, ending sprinkler nozzle. Nozzles can be fan-shaped ( (water distributed in the form of a continuous thin film) and jet ( (the water is distributed in the form of an asymmetric jet or multiple jets by rotating nozzle).

In the greening of urban households are also special machines for spraying vegetation.

We recommend to look

• Management of special equipment
  All management of special equipment is located in the driver's cab. The torque from the motor base unit is transmitted through the PTO, protective sleeve, hand-outs and conical gears on the drive shaft and the shaft conveyor screw feeder, as well as to drive the main brush. The second (upper) power takeoff shaft is used to drive the oil pump gear. Hydraulic drive car is [...]
• Universal spreader KO-104A
  Universal spreader CS-104A is designed for distribution over the surface of the road surface sand-salt mixture or other chemical reagents used for winter maintenance of streets, squares and roads. In the summer, re-equipped spreader and can be used as a dump truck for transportation of bulk cargoes. Special equipment is mounted on the vehicle chassis GA3-53A consists of a body, scraper conveyor, [...]
• Universal spreader equipment KO-705UR
  Universal spreader equipment KO-705UR intended for winter dressing of the carriageway of streets with sand and chlorides. It consists of a tow and the body, feeder, the power distributing gear transmission, hydraulic system and the spreading disk. Body mounted on the axle trailers - welded, has sloping walls and an open bottom through which moves the upper branch of the scraper conveyor, the feed materials technology [...]
• Technical characteristics of the machine IL-980A
  Operating equipment consists of a tank car, which is located inside the mechanism of discharge of silt, the vacuum pump hydraulic, pneumatic and auxiliary equipment. The tank is divided internally by a partition into two compartments: front for clean water needed to wash the mud chamber and cooling the vacuum pump, and rear, divided consigns the piston, in turn, into two branches - for the silt and mud [...]
• The scheme of the machine
  The machine operates as follows: water from the tank passes through a water filter and a central valve and the input of a centrifugal pump, which sends it under pressure through a three-way valves on the pressure pipe to the nozzles. Penstock has two side outlet to the valve and nuts to attach fire hoses. Installation of nozzles (nozzles) for cleaning and [...]