vehicles for maintenance and repair of city roads

Control osmotrovye work for watering, washing machines

October 6, 2008 | Filed under: Performance cars
(Not yet rated)
Загрузка ... Loading ...
Control osmotrovye work for watering, washing machines

For watering, washing machines hold control osmotrovye work (check the backlash in the joints and spline drive shaft connecting the drive centrifugal pump, and the state of painting special equipment) and check the major parts and assemblies: remove the lid and remove the sump tank sucks, check the tightness of its central valve mounting impeller and the state of the driven shaft seal water pump. For the sweepers carry out control osmotrovye work (check the backlash in the joints and driveshafts splines sweeping the transmission mechanism, the effect of control mechanisms working bodies of special equipment, special equipment state of the painting) and check the basic components and parts:

transmission in the working machine VPM-53 - Crankcase cover mounting the transfer case, shplintovku and tightening nuts flange drive shafts;

transmission in the working machine PU-53A - tightness and reliability of the safety coupling, leakage power takeoff, and the cone dispenser gear, sprocket mounting shaft drives the rear of and the carrier; backlash in the gear meshing bevel gears and axial backlash flange propeller shaft transmission;

chute at the rear and brush machine PU-53A - the back of the drive chain tension mount the drive sprocket and bearing caps, sign the back of sealed worm gear drive gutter brush, gutter installation in the position of brushes, rollers signaling system and the position of the forks cylinders signs gutter brushes with brushes lowered;

a scraper conveyor - the fixing of bearing caps

screw conveyor, rubber screw cover plates, lever operation mechanism and the conveyor lift cylinder, rear linkage lift the tension of the traction chain, from container body for budget - the state of the body and door locks; shplintovku fingers and opening the attachment linkage rear end;

a hopper with a system of blowers machine VPM-53 - state welds subframe mounting pins locking mechanism of the axis of the fingers back cover of the hopper. Fixed bearing housing and the base frame fan, adjust the tension of his

belts;

in, the hydraulic system and humidification system - sealing and securing the oil and water tanks. Cleaned of dirt filter sump water system, fix water pumps, water tank, cylinder cover and water pump, control valve, connect the water system, oil tank and tilting mechanism and the plunger of the cylinder;

chute at the front and brushes - engage bevel gears in the gear of their drives. Fasten the front bearing cap a drive sprocket chute adjust the tension of the chain of transmission from the transfer case to the conical reducer drive trough and the bevel gear drive front to the shaft of



We recommend to look

  • The drive compressor
    The drive is made ​​from the compressor PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In the working position hopper hydraulic cylinder rises thermos, allowing automatic translation of the bucket truck-mounted on the rear bodywork and manual vibratory rollers of the transport to working position. Bucket-truck [...]
  • Brushes are used for brush sweepers
    Applied to the brush sweeper brushes are divided into cylindrical, conical and flat or conveyor. Cylindrical brushes can be with a solid pile arrangement, paniculate, or sheaf. They are used for sweeping the pavement and supply estimates for the transporting device, or directly into the hopper. The fan and water pump is driven by a gear box change the box [...]
  • Hinged hopper to the subframe
    hinged hopper to the subframe, the state of the suction hoses and gaskets, hose and nozzle fan in the hydraulic system and humidification system - the state oil lines, hydraulic motors, hydraulic cylinders, nozzles, valves and piping system for leaks and moisture, hydraulic locks work gutter brushes transport position, the oil level in masloblokah, the action of water level indicator in the [...]
  • Management of special equipment
    All management of special equipment is located in the driver's cab. The torque from the motor base unit is transmitted through the PTO, protective sleeve, hand-outs and conical gears on the drive shaft and the shaft conveyor screw feeder, as well as to drive the main brush. The second (upper) power takeoff shaft is used to drive the oil pump gear. Hydraulic drive car is [...]
  • Power transmission spreader
    Power transmission drives the spreader conveyor drive and tipping the spreading equipment. Its main elements - the PTO, drive shaft, gear drives the conveyor, conveyor chain, hydraulic drive. The torque from the transmission base car passed the lower power takeoff shaft to the pump drive the spreading disk, and the top (through the drive shaft) - on the pump drive belt. [...]

Leave a comment