Road-building equipment

To plow, brush snow removal equipment is carried out control osmotrovye work (check the backlash in the joints and spline drive shaft connecting the drive brush, axial and radial clearances flange of the drive shaft bevel gear drive brush, paint the state of special equipment) and check the basic components and parts;

with plow equipment - tightening of the mounting bracket mechanism for lifting the plow, play ball in the frame pushing rods, rod caps screw fixation;

a brush equipment - installation of brush in the working and transport positions, the chain tension reducer (if necessary adjust) axial play and the drive shaft sprocket drive brush (detection - eliminate) the gap in the sliding clamp frame brushes. Fasten covers the brush and the main drive shaft transmission, regulate the engagement of gears in a conical reducer;

in the hydraulic system - mount control valve.

For sand-(chloride), the spreading equipment is carried out control osmotrovye work (check the axial and radial clearances in the joints and spline drive shaft connecting the drive gear and the spreading disk scraper conveyor drive shaft bevel gear drive and the spreading disk scraper conveyor, the state colors of special equipment ) and check the basic components and parts:

have peskorazbrasyvayuschego mechanism - engagement of bevel gears (if necessary adjust) and protective gear coupling drive the spreading disk state of his gland seals (if necessary replace them with new ones). Fasten cover the spreading gear drive;

a scraper conveyor - the state of the drive gear gland seals transporter (if necessary, replace them with new ones). Clutch clutch gearbox drive belt and fasten the lid;

Working in the transmission - the state of gland seals distributing reduction gear, PTO, and the intermediate support, and fix the cover PTO, and the intermediate support bearings distributing reduction gear;

in the body fixed axis bearing housings damper control mechanism the body, the rubber damper plate and the front wall of the hopper.

We recommend to look

• Hinged hopper to the subframe
  hinged hopper to the subframe, the state of the suction hoses and gaskets, hose and nozzle fan in the hydraulic system and humidification system - the state oil lines, hydraulic motors, hydraulic cylinders, nozzles, valves and piping system for leaks and moisture, hydraulic locks work gutter brushes transport position, the oil level in masloblokah, the action of water level indicator in the [...]
• The oil level in the tank hydraulic system
  the oil level in the tank hydraulic system control valve operation, reliability of fixing the plow and brush in the transport position and work slow-valve. For the sand (chloride), the spreading equipment is carried out control osmotrovye work (check the status of grid body, shutter control and work peskorazbrasyvayuschego equipment in idle mode) and check the basic components and parts; peskorazbrasyvayuschego a mechanism - the state of [...]
• Power transmission spreader
  Power transmission drives the spreader conveyor drive and tipping the spreading equipment. Its main elements - the PTO, drive shaft, gear drives the conveyor, conveyor chain, hydraulic drive. The torque from the transmission base car passed the lower power takeoff shaft to the pump drive the spreading disk, and the top (through the drive shaft) - on the pump drive belt. [...]
• The drive compressor
  The drive is made ​​from the compressor PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In the working position hopper hydraulic cylinder rises thermos, allowing automatic translation of the bucket truck-mounted on the rear bodywork and manual vibratory rollers of the transport to working position. Bucket-truck [...]
• Control osmotrovye work for watering, washing machines
  For watering, washing machines hold control osmotrovye work (check the backlash in the joints and spline drive shaft connecting the drive centrifugal pump, and the state of painting special equipment) and check the major parts and assemblies: remove the lid and remove the sump tank sucks, check the tightness of its central valve mounting impeller and the state of the driven shaft seal water pump. For sweepers spend [...]