vehicles for maintenance and repair of city roads

Garbage container

December 7, 2008 | Filed under: Control of the spray gun
(Not yet rated)
Загрузка ... Loading ...
Garbage container

Their performance depends on the duration of the loading operations associated with the replacement of containers at the yard areas. Therefore it is necessary to take measures to reduce cycle time for loading and unloading operations. This is primarily ensured by the proper arrangement of containers and vehicles when they are loaded.

Containers should be placed on the paved area in a row. Entrance to the site should be free and let the garbage containers and stop at the right and left sides. It is desirable that the machine is held at the same horizontal position and placed so that the unloading and loading of empty containers filled place with minimal maneuvering a crane. Manage the truck crane as needed thriftily in order to prevent attacks on the container platform and other containers. In this case must use the remote control so that when any movement is not a container crane located above it. No need to lift the container to a height greater than that required for its unloading or loading. In order to comply with proper weight distribution when driving cars on the route of unloading and loading of containers is recommended to begin replacing a number of empty containers, located directly behind the cab. It should also comply with this order of loading and unloading, when the number of loaded containers in longitudinal rows will not differ by more than one.

Filled trash containers to a machine, the next on a given route, the choice of which to determine the minimum distance to move to places for containers and perform all of the above recommendations relating to the order of loading and unloading of containers.

When emptying containers in places of disposal must carefully monitor the position of the platform and the crane, preventing falls and hits her in the corner.

in this case should be downloadable on the side of the platform and operate a crane with a remote control that is installed behind the cab.

Garbage container provides loading-unloading operations, as a rule, in the courtyards, in the immediate vicinity of the houses, so noise reduction engine speed should not exceed 1500 rev / min.


Tags: , ,

We recommend to look

  • Washing machine for containers
    In applying the system for collecting and transporting waste to the non-replaceable bins or containers should be regularly washed the last on-site waste collection. Where there are appropriate opportunities to do so, bins and containers shall wash musoropriemnyh in chambers or in special washing areas, and where this is not possible - you need to use the washing machine. Asfaltorazogrevateli. So [...]
  • Operating conditions
    The most significant of these affecting the efficiency of the use of special vehicles - is the intensity of vehicular traffic on the carriageway urban roads, the location of places where cars are filling the technological materials (water, sand and salt mixture, reactants), the location of places of disposal of domestic waste, etc. As indicated, the amount of pollution and especially their placement on the main road [...]
  • The device of special vehicles for road maintenance and disposal of household waste
    The special cars for the summer maintenance of urban roads include watering, washing, sweepers, as well as machines for mechanized cleaning of wells and storm sewer mains. Watering-washing machines. They are used for cleaning and watering of roads with asphalt and cement-concrete surfaces and gutter sections, as well as to sweep dust, dirt and debris, they can be used [...]
  • Control of the spray gun
    The work of the spray gun is controlled with the help of magnets, power supply circuit which is closed in accordance with the necessity of application of solid or plunger lines. For the application of thermoplastic material during the separation and edge horizontal markings on the carriageway of city streets and highways with asphalt and cement coating machine is used DE-20. During her work thermoplastic powder is heated to melt [...]
  • The third block infrared radiation
    The third block infrared radiation heats the surface and aligns the planned temperature loosened the old material before laying a new layer of the mixture. Inclined conveyor new mixture is fed from the hopper to the height of the chassis frame assembly, where the next conveyor belt transports it in the longitudinal direction of the screw distributor, located behind the rear axle car. Flow control valve for a mixture of - [...]

Leave a comment