vehicles for maintenance and repair of city roads

Hydraulic drive of M-30

March 21, 2009 | Filed under: Defining the moment of inertia
(Not yet rated)
Загрузка ... Loading ...
Hydraulic drive of M-30

Hydraulic drive machine provides a lifting and lowering the boom and the crane trunk, as well as its rotation. Hydraulic Equipment consists of a gear pump, valve, hydraulic cylinder, two-position valves, hydraulic tank, filter and lines. Drive pump is provided from power takeoff, which is installed on the mating plane of the gear box to the right.

By the bodywork are garbage KO-404, M-50, M-71, 53M, and other machines.

CS-404 Garbage - body, designed to collect household waste from standard containers with a capacity of 0.75 m3, its transportation and unloading at ground disposal or recycling.

Special installed on the vehicle the GAZ-53-02 and consists of a body, the rotary valve, cap-tilting, pushing plate, tilting mechanism, hydraulic systems, electrical equipment, as well as the mechanism of stabilization springs when operating the crane. All work operations are carried out hydraulically machine. Loading garbage truck mounted with a swivel crane that puts the filled trash container on the tilter and fixes it. Then tilter konteyneroms with a crane turns and poured into the receiving Served and compacted in the back of a van-pushing plate which performs reciprocating motion in the automatic mode. Unloaded the container is removed from the crane tilting and installed in its place. Garbage discharged under its own weight when tilted collector car body back.

garbage truck - welded, pivotally mounted on a stretcher, which ladders attached to the frame of the base in front of the body located manhole. With the bearings with a body pivotally connected to the back cover, which serves as a support for the crane and hydraulic equipment with the control levers. Cover-tilter - welded, with a folding base, equipped with a mechanism for fixing container, hinged on the cross, which is set obliquely to the rear of the hopper. There are two bunkers behind the hatch to remove debris from the hopper, which fell for the pushing plate. The back cover body pivotally connected rods with subframe, which provides both a lifting with body unloading. Rods are also used to adjust the pressing of the lid to the body.



We recommend to look

  • Crane M-30
    Crane - turning, lifting capacity of 0.5 tons installed on the right side of the machine during on-site back cover. Up and down arrow of a hydraulic cylinder, installed inside a rotator. Turn "by crane from the motor shaft through a worm gear by a mechanism located inside the rear door frame. Pushing plate - a curved steel plate, reinforced with ribs. [...]
  • Management of special equipment
    All management of special equipment is located in the driver's cab. The torque from the motor base unit is transmitted through the PTO, protective sleeve, hand-outs and conical gears on the drive shaft and the shaft conveyor screw feeder, as well as to drive the main brush. The second (upper) power takeoff shaft is used to drive the oil pump gear. Hydraulic drive car is [...]
  • The drive compressor
    The drive is made ​​from the compressor PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In the working position hopper hydraulic cylinder rises thermos, allowing automatic translation of the bucket truck-mounted on the rear bodywork and manual vibratory rollers of the transport to working position. Bucket-truck [...]
  • Cars for winter harvest bins
    Cars for winter harvest bins. Trays, prilotkovye areas of streets and roads clear of snow in the winter and from groundwater sediment in the spring and summer special machines, work equipment which is installed on cars and trucks, dump trucks. The used car in Moscow, Zul-ZOA, designed for cleaning stalls and prilotkovyh sites of city streets and roads in the winter of [...]
  • Special equipment garbage truck M-30
    Special equipment garbage truck M-30 consists of a platform, crane, hydraulic and control systems, a set of containers for the capture of their loading (unloading), entrenching tools. With the help of a crane with hydraulic drive and a special grip on the platform of the truck containers are installed eight (four on each side) which are mounted on frames tilting platforms. Filled waste containers transporting garbage to the [...]

Leave a comment