Hydraulic drive machine provides a lifting and lowering of the working body and the rotation of the rotor housing. Unlike hydraulic plow DE-210 is the design concept of separate hydraulic - hydraulic cylinders, control valve and hydraulic tank.
The basic chassis is also modified for snowplow installation of special equipment - reinforced front springs, pneumatic finalized, the frame chassis and some other elements.
Auger snowblower-D E-211 (D-9 0 2) has the same purpose as discussed snowplows. Operating equipment is installed on the machine chassis of the vehicle Ural-375E, and consists of a working body and suspension, engine working body, driveline, mechanical creeper, an intermediate gear, hydraulic systems, control mechanisms. Snow plow is made of two-engine design - the movement of the engine is the base chassis, the drive of the working body - from the additional engine 1D12BS installed along with providing his work on special systems podmotornoy frame (via an intermediate gear, a system of drive shafts and gears working body, which has two outputs - on the rotor drive gear and a chain - at the drive screw).
The design of the working body are similar to plow and differs only in the execution of the design of individual units. In the course of transmission creeper set, connected by two cardan shafts with the transfer case.
We recommend to look
- Sidewalks-sweeper K0-708
Sidewalks-sweeper K0-708 on the basis of self-propelled chassis T-16M has two versions: for the summer (equipped with a sweeping, cleaning equipment) and winter (equipped with a plow, brush and peskorazbrasyvayuschim equipment). In the summer of machine is used for cleaning dirt from the pavement in the winter - to clean the pavement of the fresh snow, sprinkling them with sand or chemical materials. The base chassis has a front and [...] - The device of special vehicles for road maintenance and disposal of household waste
The special cars for the summer maintenance of urban roads include watering, washing, sweepers, as well as machines for mechanized cleaning of wells and storm sewer mains. Watering-washing machines. They are used for cleaning and watering of roads with asphalt and cement-concrete surfaces and gutter sections, as well as to sweep dust, dirt and debris, they can be used [...] - Sidewalk machine T-469
Sidewalk machine T-469 on the chassis of the UAZ-469B - a plow, snow blower brush, equipped with a winter working equipment, which consists of a blade with a rubber blade and cylindrical brushes with nylon bristles. Welded blade mounted in front of the car and the front wheels can rotate around a central pivot to the right and left at 60 ° relative to the longitudinal axis of the machine. The brush is placed between [...] - Sidewalks-sweeper TUM-975
Sidewalks-sweeper TUM-975 has special equipment mounted on a special self-propelled chassis, performed on three-wheel circuit with front drive and rear steering axles, which consists of a dual wheel. Daylight saving equipment consists of two main chute and a cylindrical brushes, hopper, and estimates of the type of pneumatic dust control. At the bottom of the hopper set screw, which provides unloading of [...] - Power transmission spreader
Power transmission drives the spreader conveyor drive and tipping the spreading equipment. Its main elements - the PTO, drive shaft, gear drives the conveyor, conveyor chain, hydraulic drive. The torque from the transmission base car passed the lower power takeoff shaft to the pump drive the spreading disk, and the top (through the drive shaft) - on the pump drive belt. [...]
Loading ... 
