Gas infrared heaters are simple devices and services, low thermal energy, regulation of output power over a wide range by changing the gas pressure supplied to the mixer burner. Disadvantages of - the possibility of blowing the flame with wind speeds of more than 6-8 m / s, the relatively short period of service, additional activities on safety as well as support staff to work with LPG (propane).
With the current renovation of asphalt concrete pavement of urban roads and areas used asfaltorazogrevateli infrared radiation with gas emitters.
Asfaltorazogrevatel AR-53A is designed for: warm-up area to be treated asphalt pavement gas burners, with the addition of infrared radiation in case of need for a new asphalt mix, seal packed mass, coupling bands previously erected with a new cover. It is used for the maintenance of small and medium-sized maps of road surface area of 10 m2 manual vibratory rollers and card area of 10 m2 self-propelled roller, sold with equipment asfaltorazogrevatelya. Special equipment is mounted on the base asfaltorazogrevatelya chassis GAZ-53-02 and consists of a body block burner range with burners set of cylinders with liquefied gas, communications, three-phase synchronous generator type ESS-52-4-M101, elektrovibrokatka, lifting equipment Compactors , bunkers, thermos, the control system.
We recommend to look
- Drive compressor
Drive compressor unit is made from the PTO engine GAZ-53A through the gearbox, driveline and transmission belt. On the gear drive compressors mounted gear pump NSh-10E, which serves the work of hydraulic machines. In its position hopper hydraulic cylinder up the thermos, allowing automatic translation of the bucket truck-mounted on the rear of the body, and manual vibratory rollers of the transport situation in the workplace. Bucket truck [...] - The main features of the machine from the DE-5 model DE-5A
The main features of the machine from the DE-5 model DE-5A - the presence of her benzoelektricheskogo unit and working with electrical equipment (compressor, elektrovibrokatka, elektromolotkov). The hydraulic drive hopper and tailgate thermos machines is provided by hydraulic cylinders, hydraulic pump mounted on the gear mounted on the gearbox car chassis, equipped with a mechanism of inclusion; drive the compressor and elektrovibrokatka elektromolotkov made from [...] - Bunker thermos
Hopper provides storage thermos of hot asphalt mix. The mixture is fed in through an open truck (with cylinder) tray hopper, after which it was transported to the site of work. The torque from the shaft PTO, flanged to the gearbox base unit is transmitted to the input shaft of the hydraulic pump, and from the bottom of the shaft - the input shaft of the generator [...] - Asfaltoraskladchik ED-1M
To lay the asphalt mix in small areas, as well as for paving alleys and driveways yard convenient asfaltoraskladchik ED-1M developed by OKB Main Directorate of Road Management and Improvement of Moscow. The basic chassis of the paver is the 4045M forklift forklift forklift with dismantled, which is established to replace suspended frame (inside and on the operational framework moves the mobile frame). On a mobile [...] - Generator ESS-81-4
Generator ESS-81-4 provides 20 kW of electricity consumers. Generator drive shaft of the engine is carried out from the base unit through the PTO, driveshaft, intermediate bearings and V-belt transmission. The compressor provides the blasting nozzle and maps. Elektrovibrotrambovka designed for compaction of freshly placed mass with a width of the repair area is less than 500 mm. Elektrovibrokatok used to seal freshly placed mixture [...]
Loading ... 
