Road-building equipment

The most significant of these affecting the efficiency of the use of special vehicles - is the intensity of vehicular traffic on the carriageway urban roads, the location of places where cars are filling the technological materials (water, sand and salt mixture, reactants), the location of places of disposal of domestic waste, etc.

As indicated, the amount of pollution and especially their placement on the roads mainly depend on the intensity of vehicular traffic. Since the amount of dirt on the roadway shall not exceed the established standard, then, consequently, increasing the intensity of vehicular traffic each machine designed to clean dirt, will serve all the smaller area. A number of operations on the content of urban roads are made using technological materials that machine (watering-washing, sweeping, cleaning, gritters, distributors) are replenished after each cycle of operation, and their performance depends on the distance to the recharge areas of technological materials. The performance of sweepers is also affected by the placement and number of storage sites estimates.

Performance musorovoznyh and vacuum trucks to transport waste to the sites of disposal and recycling also depends on how far away are these places and their numbers. Two-stage system for collecting and transporting solid waste transfer stations include the presence or items to which the waste musorovoznye drive up the machine and its performance will depend on the number of stations and points, and distance from them

gathering places.

We recommend to look

• The requirements for cleaning the site
  Areas to be cleaned is selected with the following requirements: 1) the width of the strips should be harvested throughout the area to provide the same or a combination of rational use of machinery after harvesting the widest thoroughfares, and 2) the intensity of vehicular traffic within the site, as well as its level of accomplishment should be equal, and 3) the snow should be removed one way, [...]
• Techno-economic evaluation and optimization of operations
  Collect and transport solid waste in the ever-increasing scale, and therefore becomes very important techno-economic evaluation and optimization of these works. Due to the sharp differences in the operational background, one even the most sophisticated system for collecting and transporting waste is impossible to ensure high technical and economic parameters for different operating conditions. So it took a complex of various technological systems, each of which [...]
• The system with transfer points
  In a system with transfer points using any enclosed space, adequate in size to accommodate a small seal performance, and shift the truck spetskonteynernogo special containers, as well as to maneuvering vehicles, delivering waste. Transport waste to a transfer point in the bins or containers, non-replaceable, such as spetstelezhkah. Due to the fact that reloading [...]
• Directional R75-22 and R75-23
  In the rear valves are R75-22 and R75-23 to control the hydraulic cylinders lift the rear cover plate and the hopper, drive the truck crane plate buoyancy is controlled by three electro-hydraulic spool ZSU-5, which includes remotely from the portable console. During operation, the truck M-71 standard container with a capacity of 75 m3 0 with welded extra bushami zachalivaetsya [...]
• Technology of removal of household waste
  The resulting urban waste can be solid (household waste) and liquid (domestic and fecal waste). Number of municipal solid waste (MSW), their composition and bulk density depend on numerous factors, the most significant of which should be considered during the year, the climate zone in which the city is, the degree of improvement of housing stock. A characteristic feature of solid waste - a change in their relative amounts [...]