Operation of Watering-washing machines with a defective fastening the tank valve or damper central nozzle is prohibited. For operation and maintenance of watering-washing machines are prohibited: 1) check the oil level, fill the oil, pull the seal during operation of a centrifugal pump, and 2) to move the machine with the sleeves neulozhennymi diversions, 3) fill the tank with water from the water with the engine running the machine. It is strictly forbidden to carry out [...]
July 27, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
When working with gas burners razogrevateley type of radiation should be opened before the ignition supplies valves on cylinders and gazoraskhodnoy column and gauges to check the pressure in the systems of medium and low pressure, medium pressure shall not exceed 0.16 MPa, the low - 0,002-0,0035 MPa . After checking the pressure should be light igniter and bring it to the emitter of each burner. [...]
July 16, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
Before leaving the truck car body on the line to check: 1) the oil level in the tank, and 2) the work of PTO, the mechanism of movement control, and pushing the plate cylinder tilting mechanism, and 3) the reliability of fixed stops turning, and 4) the serviceability elektrosignalizatsii 5) seal control valves pushing plate and tilting mechanism and hydraulic joints. When operating the machine should be systematically checked the serviceability of [...]
July 9, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
When the ignition fuel nozzle, first served a weak jet, with a gradual increase in its back to normal. Light jets only need a torch with a long handle (1.5-2 m). Stir and adjust the nozzle should be, being on the side. Prior to the filling of binder needed to pay off and close the nozzle valve fuel supply pipe. When breaks in the asphalt distributor nozzle distribution [...]
July 3, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
In industrial buildings are also Mednitskii base-sheet metal, derevootdelochnoe and wallpaper department.
Consider the model of production and repair facilities for 50, 100, 150 and 300 vehicles for repair and cleaning of road surface.
Base for 50 cars. It consists of production facilities (one-storey building measuring 48x 36 m), which provides for the line ED & M-1, special [...]
June 4, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments
Base for 150 cars. It consists of a main building, a canopy for seasonal storage of machinery, racks for washing, filling station, two speakers and a transformer substation. The main building consists of a base of production facilities (one-storey building measuring 60X36 m) and the administrative and residential buildings in the form of two-storey extension measuring 36X 18 m main building is designed from standard prefabricated [...]
May 22, 2009 | Filed under: Mednitskii, sheet metal, and the wallpaper department derevootdelochnoe | No Comments