FOR DE-machine is based on the self-propelled chassis T-16M. Special equipment of this machine consists of a compressor, tanks, paint and solvent, the receiver, the working body, the pipeline system with remote control and remote-gun spray gun. Operating equipment is mounted on a welded a platform attached to the chassis frame. The front car to withstand the direction of motion at work is set to [...]
Gas infrared heaters are simple devices and services, low thermal energy, regulation of output power over a wide range by changing the gas pressure supplied to the mixer burner. Disadvantages of - the possibility of blowing the flame with wind speeds of more than 6-8 m / s, relatively short period of service, additional activities on safety, as support staff to work [...]
The energy balance of these machines in operation include (depending on the technology works): the cost of power to drive the bitumen pump, defined as vehicles for transporting and distributing bitumen, cost of power to drive the compressor is defined as machines that destroy the hard cover, the cost of power to drive the mixer to be taken when mixing the mastic in the boiler with a capacity of [...]
The most important condition for the effective operation of the machine - the cab cleaver blade adjustment, ensuring their placement at the level of the pavement. If the knife meets the cleaver on the road covering the local hills, the load on it increases. In the cleaver provides a safety device that provides a knife at a meeting with an obstacle on the road surface, it is moved up and pass [...]
Operation of Watering-washing machines with a defective fastening the tank valve or damper central nozzle is prohibited. For operation and maintenance of watering-washing machines are prohibited: 1) check the oil level, fill the oil, pull the seal during operation of a centrifugal pump, and 2) to move the machine with the sleeves neulozhennymi diversions, 3) fill the tank with water from the water with the engine running the machine. It is strictly forbidden to perform at [...]
Hydraulic drive machine provides a lifting and lowering of the working body and the rotation of the rotor housing. Unlike hydraulic plow DE-210 is the design concept of separate hydraulic - hydraulic cylinders, control valve and hydraulic tank.
The base chassis is also modified for snowplow installation of special equipment - reinforced front springs, pneumatic finalized, chassis frame and some other elements.
[...]
